Multisynth-based Architecture

Traditional clock generators use a simple integer-N phased-locked loop (PLL)-based architecture. The output clock frequency is a function of the input clock frequency and the PLL divider values as shown in the equation
Equation: fOUT = fIN.N/P.R
Traditional single PLL-based IC solutions are suitable for simple integer clock multiplication of reference inputs or clock generation from crystal inputs. However, many applications require clock generation of multiple non-integer-related frequencies (e.g., 125 MHz Ethernet and 106.25llMHz Fibre Channel). Traditional solutions require that the crystal frequency be changed to support each unique frequency plan. This forces the designer to use one or more custom crystals and multiple clock generator ICs to generate the required set of frequencies, increasing the cost, complexity and power consumption of the overall solution.

New Any-Rate Clock Multiplier Architecture Simplifies Design
Recent advances in mixed-signal analog design have made it possible to provide any-rate frequency synthesis from a single device. Silicon Labs newest clock architecture leverages a fractional-N PLL used in concert with a low-jitter fractional divider termed MultiSynth to produce any-rate frequency synthesis on multiple output clocks. The flagship of this new product family is the Si5338 Any-Rate, Any-Output Quad Clock Generator. This technology dramatically simplifies timing architectures by integrating the frequency synthesis capability of four PLLs in a single device, greatly reducing size and power requirements compared to traditional solutions.

MultiSynth Technology
The Si5338s low phase noise, high-frequency VCO supplies a high-frequency output clock to the MultiSynth block on each of the four independent output paths. The first stage of the MultiSynth architecture is a fractional-N divider, which switches seamlessly between the two closest integer divider values to produce the exact output clock frequency with 0 ppm error. To eliminate phase error generated by this process, the MultiSynth calculates the relative phase difference between the clock produced by the fractional-N divider and the desired output clock and dynamically adjusts the phase to match the ideal clock waveform. This novel approach makes it possible to generate any output clock frequency without sacrificing jitter performance. Based on this architecture, each output clock can be individually programmed to generate any frequency from 0.16 to 350 MHz, and select frequencies to 700 MHz. Typical jitter performance enabled by this MultiSynth-based architecture is 1 ps RMS.

Time for a greener architecture

For more articles like the one below please visit us at Plymouth architects

The Gestalt school identified several principles of use to artists and architects, but the most important is that of balance – that is, the constantly shifting balance that balances all opposites within the constantly shifting matrix of reality. Interestingly the principles of form found in the natural world are not dissimilar to the Gestalt principles that also operate in the unselfconscious human building traditions I referred to at the beginning of this article. Vernacular building traditions have evolved slowly over long periods of time and thus possess some of the coherent organic order found also in Nature. As in animal architecture, vernacular architecture possesses an inherent beauty: the beauty of integrity and unity. Such beauty emerges from the totally balanced integration of a system, its function and use into the broader realms of Nature.

So have we stumbled onto the reason why so many modern human-made environments fail to come up to the quality of some older towns and cities? At root the problem seems to lie in the spiritual posture that we adopt with Nature. Many people would now accept that as humans we are completely co-terminal with Nature. However, in claiming ownership, as we do, of that part of Nature that we call -self’, we not only separate ourselves from Nature but also separate ourselves from our own environments. Yogis tell us that the transcendental world of the spirit – the world of unity and pure consciousness – supports the relative world at each point. They tell us that the transcendental realm is a world without qualities yet gives rise to and sustains all qualities. They tell us that it is to be found in the -gap’ between the different states of consciousness: waking, dreaming and sleep; in the silences in music; between syllables in spoken language and even between our thoughts. The great 19th-century Indian holy man Ramakrishna Paramahansa was once asked, -Where do I find God?- His reply was, -Look between two thoughts.- This gap between perfectly balanced opposites is where life and spirit enter the relative world. It is also the vital middle ground between a subject and an object that defines the -mean’ and gives the meaning.

In conclusion we can say that it is order that gives life to a work and it is order that gives a work its spiritual dimension. It is in the perfect orderliness of a great work that the two worlds of materiality and spirit conjoin. Order is the agent that serves as the conduit between these two realms. Dare we say that -orderliness’ is next to -Godliness’?

Plymouth architects

Management Colleges For Mba In Architecture Designing

A profound understanding of management courses with that of architecture course is essential for bringing forth the best of architecture into the business line. While for the most part, architecture is a blend of science and art, business pertains to bringing this art to the line where its creativity is admired and kept to its highest terms. The difference between potentially good trades as opposed to a fallacious trade-off can only be brought through appropriate management courses. It would be a good practice for an architect to opt for mba courses in order to gain the maximum from their respective architecture course.

Not only does professional mba courses is responsible for helping an architecture major to develop the necessary trading skills but it also helps in giving the person a better gist about the skills that are essential to turn the architecture course into a prominent business venture. MBA coaching classes are often beaming with the necessary skills that could turn a graduate from an architecture college into a prominent business magnate. Most of the courses include detailed analysis of the contemporary practices in the architecture as well as the management industry to bring forth the best of both the fields into one.

A typical business school offering management courses for architecture would include subjects that talk about management behaviour and processes pertaining to it. Furthermore, the course would include managerial economics, as well as the basics relevant to accounting to help architects discover the business potential that architecture has in the current times- things that an architecture college would miss out on. The papers also include managerial communication, the key to impress clientele and increasing the business ventures for the company. Furthermore, the management courses also deal with the business laws and ethics that make a business stand out from the others. It should be understood that architecture is all about the elements of designing, which is why the mba courses pertain to the space planning, as well as project management in order to bring forth the best results for the clientele.

Management would vary as per the real estate projects that come by. For instance, a housing project would require a different management approach as opposed to that of commercial projects. Management courses make sure that every aspect of architecture course is dealt with the elements of management. The integration of management along with architecture comes with equal opportunities to turn ones luck. Architects would require effective mba coaching classes in order to open themselves to the rules of management to carve out a specific place in architecture- a varied and yet a complementary association.

Spanish Mission Art Deco Style Architecture

In the architectural world, just as in the worlds of food, clothing, and design, as styles come together we have whats called fusion. In fusion, often disparate elements come together to create a cohesive union, and sometimes seemingly harmonious elements come together in a not so harmonious way. In terms of architecture, a truly interesting blend happened in the beginning of the 20th century, melding together the elements of Spanish Mission revival style with the hip sleekness of Art Deco.

Art Deco buildings are known for their futuristic, sleek, dramatic, geometric flair. Cubes, zigzags, and futuristic chic came together to express the growing machine age in the United States. In the roaring twenties and early thirties, the jazzy Art Deco architecture was sweeping the nation. The Art Deco style found its inspiration from many different sources. The austere shapes and curves were taken from the Bauhaus School and the streamlined modern technology-looking design was melded with images of icons from the Far East, Greece, Rome, Africa, India, and Mayan and Aztec cultures. But above all these, Art Deco took inspiration from an architectural discovery in Egypt.

In 1922, archaeologist Howard Carter and his sponsor, Lord Carnarvon, thrilled the world with their discovery of the tomb of King Tutankhamen. Egypt-chic soon swept the nation and influenced the design of clothes, jewelry, furniture and graphic design. And of course, architecture.

Another style that was popping-up at the same time was the Spanish Mission Revival style, and in California, these two disparate styles found a way to come together in harmony as Hollywood actors were clamoring to get their homes built in the chic Spanish style. California isnt the only place to see the beautiful union of these two styles.
Hawkes Bay has some tremendous Art Deco and Spanish Mission Walks. Hawkes Bay is located in Napier, New Zealand. Following a devastating earthquake in 1931, the whole commercial heart of Napier was destroyed, but the city was about to be reborn in the newest architectural style, and to become the hottest city. In Hawkes Bay, you get to see all the styles right next to each other: Spanish Classic, Spanish mission, and Art Deco, all side by side.

There are also places in the United States that show this great mixture of styles and iconographies. Take for example a lovely Spanish Revival building in St. Louis, by the architect T.P. Barnett, son of George I. Barnett, another famous architect in St. Louis. The T.P. Barnett building is particularly interesting because it also has Art Deco influences, making it one of the most unique buildings in the Grand Center region of St. Louis. Certainly the next time youre in St. Louis, you need to visit this Spanish Revival building on Washington Avenue.

Architectural Evangelist Advocating Innovation In Architecture

Architectural Evangelist is a one of a kind architectural newsletter broadcasting the message of the cause, effect and need for innovation in the field of architecture. It is the brain child of a team of designers, architects, content developers,and technicians. We are speaking to architects, students, builders, interior designers/decorators and re-modelers. Architectural Evangelist braces the change of seasons with our centralized them of spring in the first issue. Our aim is to maintain Architectural Evangelist as a quarterly issue, with news and updates about the business of offshoring, architecture and design; How Tos; creative inputs from design experts, technical professionals and industry gurus; and articles, resources and everything in between.

Spring/Summer 08 design tips for your home
Color, breeze and sunshinethats what comes to mind when you say spring. Design tips for your home that can make any ordinary room into a fun, cozy haven This spring spruce up for a breath of fresh air to sweep through your living spaces with Architectural Evangelists design ideas and tips that spell spring like nothing else can.

Going green
Building and construction have a great effect on the environment. In the United States alone buildings alone account for 40-49{7667bbe6306b12c91d3d2a194169f72cd5155bf02f455976d930633f55a7fe5f} energy consumption, 25{7667bbe6306b12c91d3d2a194169f72cd5155bf02f455976d930633f55a7fe5f} of water consumption, 70{7667bbe6306b12c91d3d2a194169f72cd5155bf02f455976d930633f55a7fe5f} of total energy consumption and 38{7667bbe6306b12c91d3d2a194169f72cd5155bf02f455976d930633f55a7fe5f} of total carbon dioxide emissions. Green building information, tips and trends.

The new face of outsourcing
In this age of competition, companies are increasingly turning to specialization for improving cost and time feasibility and increasing efficiency. With knowledge intensive areas entering the fray, it allows organization the flexibility and provides the resources for the business growth of the organization
How to tip: Choosing the right offshore services provider
To build long term relationships with offshore service provider you need to play detective and find out all you can about the organization first. Heres what you need to know

Easy Source of Topics for Architecture Essay Writing Tasks

cademic architecture essay writing tasks would usually be performed by university students taking up undergraduate courses in architecture, architectural engineering, building services engineering, architectural technology, building design, other courses related to architecture and building design. The selection of engaging and good topics would be the first that the students would do if they were given the option of choosing their own topics for their architecture essays. If the students are having some difficulties in selecting particular topics for their architecture essays, an easy source where they could find good topics would be the general discussion of the discipline of architecture.

The general discussion of the discipline of architecture is arranged into several main headings with sub-headings under each main heading, and for the most part, each sub-heading would usually have smaller topics that are confined to a specific area of discussion. The student could either select a topic from the main heading or choose the specific areas of discussions that are under each sub-heading that would become the specific topic for his architecture essay.

Under the general discussion of architecture, the main headings and their respective sub-headings are: theory of architecture that includes historic written works on architecture and modern architectural concepts; history of architecture that includes ancient architecture, Asian architecture, Islamic architecture, Medieval architecture, Renaissance architecture, early modern and industrial age architectures, and contemporary architecture. In addition, some of the sub-headings are broken down into smaller areas from which he could select a specific topic.

A student performing regular or constant writing of architecture essays as part of his course requirements should take note that the essay structure of an architecture essay is similar to the basic structure of other academic essays, which consists of sections of the introduction, body and conclusion. Consequently, the student should follow the basic rules or steps in essay structuring that he studied and learned from the other essay writing tasks that he performed from his other academic subjects. The specific content in section of the essay on architecture would naturally be different compared to the specific content of other essays. But the style of writing the content for each section would be the same regardless of the specific subject area under the essay.

The university and college students who would research and write architecture essay should take note that some of the possible topics they would select for their architecture essays could also be applicable and relevant to use for their other academic essay writing tasks. For example, many of those students especially during their first year of studies could perform history essay writing tasks. Therefore, an example of history essays about the architecture related topics could include the architectural history, history of various architectural styles, architectural mythology, and the specific histories of the architectural styles of different civilisations.

How is 3D printing technology used in Architecture and Medicine

D printing technology is used to manufacture prototypes, tools, and end-user parts directly from a CAD design. This printing technology offers unprecedented flexibility as it can create a part of any dimension out of any material. Some of the 3d printing materials used include metals, polymers, ceramics, composites, and many more. The 3D printing technology has complete control over material composition, surface texture, and micro-structure of the prototype. 3D printing technology also allows the user to construct prototypes using two different materials. >

Lets take a look at this amazing technology and how it has affected the field of architecture and medicine:

3D printing for Architecture

Architects know that there is nothing like a physical model of a building when it comes to displaying their work or design concept. Physical models also play an important role when it comes to explaining and convincing the customer while selling a project.

3D printers are affordable and high quality solutions for architects. Building a physical model requires great deal of expertise, precision, and time. 3D printing machines help designers focus on their building design, while the devices make 3D models of the project.

Many architects are not tech-savvy and are not used to operating complex devices. 3D printers do not require human intervention at any stage of the printing process. Architects just need to need to draw a CAD diagram of the project and instruct the 3D printer to build a 3D model. The 3D printer can print the model within a few hours, which can then be presented to the client.

3D printers are capable of producing of 3D models with accuracy and speed without compromising on the finer details of the architectural project. The price of desktop 3D printing machines is not that high and independent architects can also afford them.

3D printing for Medicine

The application of 3D printing technology can also be found in the production of medical devices. There are different 3D printing materials available that can be used to build real parts. For example, manufacturing hearing aids is a complex process because they are custom-fit devices and cannot be mass produced. 3D printing greatly helps in such matters where medical devices need to custom-fit a patient.

The future of the 3D printing technology is very bright. Market experts state that 3D printing technology will be affordable to the masses by the next decade. The prices of 3D printing devices are falling rapidly, and it is believed that the prices of 3D printers will drop by as much as 80{7667bbe6306b12c91d3d2a194169f72cd5155bf02f455976d930633f55a7fe5f} in the next 5-10 years. It will not be a surprise to see 3D printing devices in each household just like refrigerators, washing machines, and televisions.

Pangnfe Advanced Ip Ngn Architecture Field Engineer

The Cisco IP Next-Generation Network (IP NGN) Structure Skills shows knowledge the IP NGN architecture, from revenue to support. The Innovative IP Next-Generation Network Structure Skills is not currently required for qualifications, but is optionally available for Gold and Leading qualified associates. We are also flying the addition of this specialization as an option for Gold Certification.

Is your organization interested in taking full advantage of the Cisco Innovative IP NGN Structure Skills for Gold Certification? If so, deliver an email that contains your associate organization name and a member of the program staff will contact you with more details.
Cisco IP NGN Structure Skills helps your company:

Develop revenue, specialized and service abilities for incorporated social media solutions

Increase specialized proficiency internally

Gain identification as a specialized associate in the Cisco Partner Locator

Explore IP NGN resources
This specialization also allows you to a range of additional benefits. You can:

Participate in Cisco route motivation programs

Receive invites to Cisco subsidized associate activities

Access Partner Knowledge Connection

Use My Cisco to customize web content and get details quickly

Send an argument stating your accomplishment

Visit the Cisco Design Area for examined styles and configurations
Exam 650-756

Examination 650-756 includes 60 concerns and time permitted to finish this exam is 60 moments or 1 time. This exam is available in British terminology. Candidates can sign-up for this exam at any Pearson VUE middle.

The 650-756 Innovative IP Next-Generation Network (NGN) Structure Area Professional (PANGNFE) examinations will determine a learner’s understanding of the Cisco IP NGN architecture and capability to map specialized alternatives to company needs. You will also need to show a knowing of the different foundations of the Cisco IP NGN architecture. This exam is a need of the Innovative IP NGN Structure Expertise for Area Technical engineers. Quality will determine a learner’s capability to provide an obvious and powerful concept around the functions, functions and advantages of the Cisco IP NGN architecture in business-focused conditions. It will also analyze a learner’s capability to evaluate typical problems throughout a company that Cisco IP NGN architecture can help fix and efficiency in introducing company influencers for Cisco IP NGN architecture programs.
650-754 Exam Topics

The following subjects are typical recommendations for the articles likely to be involved on the examination. However, other relevant subjects may also appear on any particular distribution of the examination. To be able to better indicate the 650-754 material of the examination and for quality requirements, the recommendations below may modify whenever without observe. They include:

Describe Cisco IP NGN conditions and advantages
Describe Cisco IP NGN alternatives and how to arrange them with client needs
Describe typical client objections
Describe the aggressive surroundings and how to place Cisco IP NGN solutions
Describe how to create and existing Cisco IP NGN alternatives as a company situation to the customer
Describe the company and specialized advantages of the Cisco IP NGN architecture
Describe the company individuals for Cisco IP NGN structure applications

Flexpod Net App – Innovative and Dominant Reference Architecture

The converged infrastructure market finds the flexpod net app very innovative and dominant reference architecture. This data center platform from NetApp and Cisco has found appreciation from users worldwide. Many of these users choose to standardize it for mission-critical applications. This was introduced in the year 2010 and has left many impressed owing to its excellent features. The flex pod netapp scores the brownie points in terms of performance, scalability and availability. They can be found in different packages and are easy to deploy and manage. It won’t be out of context to say, they have created a buzz in the IT world worldwide. The availability of flexpodnetapp is the result of a business collaboration entered between Cisco and NetApp. Their joint efforts have been to enhance capabilities and add broader support to important applications. This is done to ensure the FlexPod is able to meet broadest possible range of IT requirements so that most business-critical applications can be run smoothly. They have been credited for supporting various types of data operating systems and virtualization of databases. Likewise, they have made efforts to address various infrastructure needs in the small and medium-sized entities. These enhancements have given the flexpodnetapp an edge in terms of higher-levels of integration. It has facilitated data centers to interconnect by offering them suitable equipment. This has, in a way, made it easy for entities to either scale up or scale out the performance. They have made storage virtualization simple which in turn has made business data management very easy. It also minimizes total cost of ownership dramatically. The technology used helps in logical demonstration of data as per requirements of virtual storage pools. In a sense, it allows you to focus on critical business applications rather than devote time on complexity of the hardware. The storage virtualization capacities come at various levels of storage hierarchy. This can be seen on all storage platforms. The network provisions are flexible and service providers can regulate flexpodnetapp depending on their needs for a specific period of time. This has given them the edge over other available options. Their biggest contribution has been its ability to provide service to more than 1000 servers. Of course, service providers interested to avail their services need to use Flex Pod in order to optimize their functioning. Flex Pod customers are proud to own one as it enables them to enjoy cloud management solutions. Its phenomenal success has prompted Cisco and NetApp to offer multiple data centre architectural designs. This has been accomplished with help of NetApp Cisco Flex pod project.

Implement SaaS architecture to improve organizational storage space

These days, organizations are growing rapidly with outstanding performance and productivity. Data is also increasing along with this business improvement. This data includes; finance details, human resource details, requirement and project details and many more. Applications, hardware resources, software programs, operating systems and many more are also considered important information. It is important for every organization to store and maintain this crucial data for longer years. Data storage is the main problem for all IT organizations, as it takes much storage space to save and maintain the data in a device. Usually, servers are used as the main storage devices to maintain the information for future references. But, these servers have the limited capacity and cannot afford large amount of information. Due to this, IT organizations have developed several technologies and applications to enhance the storage efficiency in business enterprises. Cloud technology is one, which provides computing service through internet. Cloud computing is the latest service provided for all industries to enhance their business performance with various services like infrastructure as a service (IaaS), platform as a service (PaaS) and software as a service (SaaS). All these services can help the organizations to get several business solutions. SaaS architecture is the one that provides storage services for the enterprises. It is defined as a deployed software as a service program with a business IT structure and set up. In this architecture service, SaaS also described as storage as a service as it helps the organizations in maintain the important information for further references. Inefficient software programs linking can lead to less efficiency of growth and greater loss of cost; hence, SaaS architecture is important for many business industries. It can provide best profits with great customer service and remote access for various applications and tools to enhancing the business more effectively. It can save the operational costs by reducing the other physical resources as it can save the data in their internet databases. It is more effective to perform IT operations and specialized services to help the enterprises in several aspects to increase the profit margins. It also enables web services to provide various solutions through online using network connections. SaaS is cost effective solution as it is provided by the third party vendors or it can also be paid according to the usage. Hence, most of the small organizations are planning to implement these architectures to enhance their business performances and productivity.

>

For more information on SaaS architecture